TOS SN 55B 63B & 71B, Lathe Operating Instructions Maintenance & Assembly Manual

November 23, 2016, 8:04 am

≫ Next: TOS Strojimport BEV 80-100, Cylinder Grinder Operation Methods and Design Manual

≪ Previous: TOS SN 40B 45B & 50B, SV18RA, lathe Operations and Maintenance Manual 1976

$

0

0

http://industrialmanuals.com/lathe-operating-instructions-maintenance-assembly-manual-p-4570.php

TOS SN 55B 63B & 71B, Lathe Operating Instructions, Maintenance & Assembly Drawings Manual Year (1976)

This Manual Covers Models:
55B
63B
71B
 
This Manual Includes:
T-262 Operations & Maintenance with T-260 Assemblies

Your Serial Number is Stamped on the Guide ways or on the Machine BED.
Description of Operating Parts of the Machine
Adjustments of Main Spindle the front Bearing on these sheets
Optional Equipment in Pictorial Part Totaling (11)
Principal Data of the Machine
Specifications
Technical Description of the Machine
Gear Train
Transport of the Machine
Erection of the Machine
Electrical Equipment of the Machine & Connection to Mains
Instructions for Servicing the Electrical Equipment defects and how to rid of them
Operation of the Machine
Description of the Main Sub-Assemblies, their Operation and Servicing
Trial Run of the Machine
thread Cutting
Chart of Cutting Speeds
Lubrication of the Machine
Bearings Employed
Belts Employed
Sealing rings employed
List of Parts Subject to Wear
Instructions for ordering Spare Parts
Description of the Optional Equipment/ some Equipment only (18)
List of Drawings Totaling (29)
Machine Drawings
OB Drawings
OBVOD 220V Circuits
OBR 7b Circuits
Charts
Graphs

Functionally Illustrated Machine Views showing Component Identifications


This Manual Has 108 Printed Pages.
Year 1976

---

TOS Strojimport BEV 80-100, Cylinder Grinder Operation Methods and Design Manual

November 23, 2016, 8:06 am

≫ Next: TOS SUS, SUS 63-80 SSS 63-80, Lathe Operation Service Wiring and Parts Manual

≪ Previous: TOS SN 55B 63B & 71B, Lathe Operating Instructions Maintenance & Assembly Manual

$

0

0

http://industrialmanuals.com/strojimport-80100-cylinder-grinder-operation-methods-design-manual-p-4569.php

TOS Strojimport BEV 80-100, Cylinder Grinder, Operation Methods and Design Manual

This Manual Covers Models:
BEV 80-100
 
This Manual Includes:
Choosing a TOS Machine.

Grinding Method, Selection and Maintenance of Grinding Wheels
Design of the Grinder with Brief Description of Machine Groups
Application of Machine
Erection of Grinder and Operators Site
Standard and Optional Equipment
typical Application of the Machine and Examples of Work
Time Studies to Given Examples
Ordering of New machine and choice of suitable optional equipment
Ordering of Spare Parts and Parts Subject to Wear
Special Purpose Machines Setup for Selected job

For Production Engineers, Chief Technicians

This Manual Has 45 Printed Pages.

TOS SUS, SUS 63-80 SSS 63-80, Lathe Operation Service Wiring and Parts Manual

November 23, 2016, 8:08 am

≫ Next: Toshiba BMC-8B, Milling Machine Schematics Manual 1977

≪ Previous: TOS Strojimport BEV 80-100, Cylinder Grinder Operation Methods and Design Manual

$

0

0

http://industrialmanuals.com/6380-6380-lathe-operation-service-wiring-parts-manual-p-5664.php

TOS SUS, SSS 63-80 Lathe Operations Service and Parts Manual Year (1974)

This Manual Covers Models:
SUS
SSS
63-80
63
80  
This Manual Includes:
Operating Instructions
Guiding Particulars of Machine
Technical Data of Machine
Test Chart of Machine
Technical Description
Diagram of Machine Drive
Machining Possibilities
Transport of the Machine
Dimensions of the Machine
Erection

Electric Wiring of the Machine
Electrical Equipment and Connection to Mains
Basic Wiring Diagrams:
SUS 63-80
SSS 63-80
SUS 63-80 Reduced Speed
Electric Wiring on Machine
Electric Motors Used

Description of Main Parts of the Machine
Their Functions
Maintenance
Optional Equipment
Description
Operation
maintenance
Special Machine Constructions
Trial Operation after Erection of the Machine
Machine Efficiency
Tread Cutting

This Manual Has 116 Printed Pages.
Year 1974

Toshiba BMC-8B, Milling Machine Schematics Manual 1977

November 23, 2016, 8:10 am

≫ Next: Toshiba DAL SVSII, Auto Ladling Unit, Isntructions Manual 1985

≪ Previous: TOS SUS, SUS 63-80 SSS 63-80, Lathe Operation Service Wiring and Parts Manual

$

0

0

http://industrialmanuals.com/toshiba-bmc8b-milling-machine-schematics-manual-1977-p-5218.php

Toshiba BMC-8B, Milling Machine Schematics Manual Year (1977)
 
This Manual Covers Models:
BMC
8B
BMC-8B
This Manual Includes:
Schematic Diagrams and Circuits
Power Circuits
A.C. Control Circuits
Input module Circuits
Output Module Circuits
Relay Driver
D.C. control Circuits Including Servo Motor Circuits
Spindle Circuits
Electrical Parts Lists

This Manual Has 84 Printed Pages.
Year 1977

Toshiba DAL SVSII, Auto Ladling Unit, Isntructions Manual 1985

December 1, 2016, 10:02 am

≫ Next: Toshiba Shibaura BT-8B CR & SR, Milling, Instructions Parts & Assembly Manual

≪ Previous: Toshiba BMC-8B, Milling Machine Schematics Manual 1977

$

0

0

http://industrialmanuals.com/toshiba-svsii-auto-ladling-unit-isntructions-manual-1985-p-5660.php

Toshiba DAL SVSII, Auto Ladling Unit, Instructions Manual Year (1985)

This Manual Covers Models:
DAL
SVSII
This Manual Includes:
Used with DC Type Die-Casting Machines
From Ladling Molten Metal in Specified Quantities from
the Aluminum Holding Furnace to pouring it into the Gate of A Sleeve.
Introduction
Installation
Adjustment and Test Operation
Seed Control Units
Motors
DC Motors
Check and Maintenance
Attached Drawings
Parts and Equipment Used
Specifications

This Manual Has 74 Printed Pages.
Year January 1985

Toshiba Shibaura BT-8B CR & SR, Milling, Instructions Parts & Assembly Manual

December 1, 2016, 10:04 am

≫ Next: Toshiba Shibaura BT-8B CR and SR, Milling Machine Parts Lists Manual 1965

≪ Previous: Toshiba DAL SVSII, Auto Ladling Unit, Isntructions Manual 1985

$

0

0

http://industrialmanuals.com/toshiba-shibaura-bt8b-milling-instructions-parts-assembly-manual-p-4580.php

Toshiba Shibaura BT-8B CR & BT-8B SR, Horizontal Boring Milling Machine, Instructions Parts and Assembly Manual Year (1965)

This Manual Covers Models:
BT08B
CR
SR
 
This Manual Includes:
STE 12022-1
Outline of Machine
General Data, Electric Equipment and Accessories
Installation Procedure

Operations of Machine:
Preparations for Operation
Operation Procedure
Safety Devices
Machining
Reading of Traveling Distance

Lubricant Circuits
Control and Handling of Electric Equipment
Electric Control
Maintenance of Electrical Equipment
Operations of Maintenance Method of Electric Devices

Maintenance of Machine:
Initial Maintenance after Installation
Periodical Maintenance Procedures
Exchange of Lubricant
Adjustment of Machine parts
Symbols Indicating Machine Tool Operation

Schematics and Diagrams
This Copy is Intellectually sound and print is light

This Manual Has 110 Printed Pages.
Year December 1965

Toshiba Shibaura BT-8B CR and SR, Milling Machine Parts Lists Manual 1965

December 1, 2016, 10:06 am

≫ Next: Townsend 80, Duplex Spline Miller, Operatons Manual Year (1940)

≪ Previous: Toshiba Shibaura BT-8B CR & SR, Milling, Instructions Parts & Assembly Manual

$

0

0

http://industrialmanuals.com/toshiba-shibaura-bt8b-milling-machine-parts-lists-manual-1965-p-4581.php

Toshiba Shibaura BT-8B CR & BT-8B SR, Horizontal Boring Milling Machine, Parts list and Assembly Drawings Manual Year (1965)

This Manual Covers Models:
BT08B
CR
SR
 
This Manual Includes:
I.M Inventory # T-273
Parts Lists
Functionally Illustrated Assembly Drawings showing Component
     Identifications
This Manual is Best When with Manual T-272-Instructions Manual.
We carry both these Manuals.

This Manual Has 183 Printed Pages.
Year December 1965

Townsend 80, Duplex Spline Miller, Operatons Manual Year (1940)

December 1, 2016, 10:08 am

≫ Next: Toyo Model T-IIIC & T-IIIB, Automatic Internal Grinding Machine, Instruct Manual

≪ Previous: Toshiba Shibaura BT-8B CR and SR, Milling Machine Parts Lists Manual 1965

$

0

0

http://industrialmanuals.com/townsend-duplex-spline-miller-operatons-manual-year-1940-p-2231.php

Townsend 80, Duplex Spline Miller, Operations Manual Year (1940)   

This Manual Covers Models:
80

This Manual Includes: 
Details of Construction and Operation
Standard Specifications
Description
Construction
Model 80 Duplex Spline Milling Machine method of Operating
Through Cutting
Lubrication
Replacing the Spindle Belts Right Hand Spindle"
Machine and Parts Drawings showing Component Identification

This Manual Has  23   Printed Pages.
Year October 1940

---

Toyo Model T-IIIC & T-IIIB, Automatic Internal Grinding Machine, Instruct Manual

December 2, 2016, 6:33 am

≫ Next: Toyoda FV 65, Milling Machine Parts Manual

≪ Previous: Townsend 80, Duplex Spline Miller, Operatons Manual Year (1940)

$

0

0

http://industrialmanuals.com/toyo-model-tiiic-tiiib-automatic-internal-grinding-machine-instruct-manual-p-2243.php

Toyo Model T-IIIC & T-IIIB, Automatic Internal Grinding Machine, Instructions Manual Year (1973)     

This Manual Covers Models:
T-IIIC
T-IIIB

This Manual Includes: 
S/N 22540
Toyo Kogyo, Japan
Instruction Manual for Model T-IIIB
Notes
Introduction
Specifications
Installation
Operating Procedure
Preparation for Operation
Hydraulic Mechanism
Cautions on Operation
Face Grinding Device
Electrical Circuit Diagrams
Instruction Manual for Toyo Wheelhead
Maintenance Manual


This Manual Has  65  Printed Pages.
Year 1973

Toyoda FV 65, Milling Machine Parts Manual

December 2, 2016, 6:35 am

≫ Next: Toyoda GUP32 and GUS32, Universal Cylindrical Grinder Parts Manual 1979

≪ Previous: Toyo Model T-IIIC & T-IIIB, Automatic Internal Grinding Machine, Instruct Manual

$

0

0

http://industrialmanuals.com/toyoda-milling-machine-parts-manual-p-5220.php

Toyoda FV 65, Milling Parts Manual
 
This Manual Covers Models:
FV 65
This Manual Includes:
Parts Catalog
Parts Lists
Functionally illustrated Drawings showing Component Identification

This Manual Has 56 Printed Pages.

Toyoda GUP32 and GUS32, Universal Cylindrical Grinder Parts Manual 1979

December 2, 2016, 6:42 am

≫ Next: Buck Doe Machines

≪ Previous: Toyoda FV 65, Milling Machine Parts Manual

$

0

0

http://industrialmanuals.com/toyoda-gup32-gus32-universal-cylindrical-grinder-parts-manual-1979-p-5221.php

Toyoda GUP32 and GUS32, Universal Cylindrical Grinder, Parts Manual Year (1979)
 
This Manual Covers Models:
GUP32
GUS32
32 x 50
This Manual Includes:
Parts Catalog
Parts Lists
Functionally illustrated Drawings showing Component Identification

This Manual Has 151 Printed Pages.
Year 1979

Buck Doe Machines

December 2, 2016, 6:48 am

≫ Next: Toyoda Toyopuc PC-1, Grinding Electrical Diagrams Manual

≪ Previous: Toyoda GUP32 and GUS32, Universal Cylindrical Grinder Parts Manual 1979

$

0

0

I spent 3 weeks in the Arkansas Forest chasing deer. I understand from a Great Hunter that the doe go into rut. But it's the Buck that is the aggressive one. The Buck has to take care of his Bucklyhood. not the Doe. I saw a dozen deer and they are like machines running around jumping across the roads in a single bound. Not even touching the road with one hoof. It's like an arcade. You better have your gun up and ready or they are gone in a flash.
Like as fast as a machine and all you see is a white tail flashing like a flag.

Toyoda Toyopuc PC-1, Grinding Electrical Diagrams Manual

December 4, 2016, 8:16 am

≫ Next: Trabon, Meter-Mist, Operating Data Engineering Lubrication System Manual

≪ Previous: Buck Doe Machines

$

0

0

http://industrialmanuals.com/toyoda-toyopuc-grinding-electrical-diagrams-manual-p-5658.php

Toyoda Toyopuc PC-1, Grinding Electrical Diagrams Manual

This Manual Covers Models:
PC-1
This Manual Includes:
Electrical Diagrams
Power Supply
circuits
CNC
Coolant
Table
Wheelhead
etc.

This Manual Has 120 Printed Pages.

Trabon, Meter-Mist, Operating Data Engineering Lubrication System Manual

December 4, 2016, 8:18 am

≫ Next: Trane SCA 10MC01A and 4A, Climate Changer Heater. Install Maint Operations Manua

≪ Previous: Toyoda Toyopuc PC-1, Grinding Electrical Diagrams Manual

$

0

0

http://industrialmanuals.com/trabon-metermist-operating-data-engineering-lubrication-system-manual-p-2239.php

Trabon, Meter-Mist, Operating Data Engineering Lubrication System Manual     

This Manual Covers Models:
Meter-Mist

This Manual Includes: 
32 to 1000 Bearing Inches
4 Package Styles
12 Models
Engineered Automatic Systems
Complete Visual Operating Indication
Bulletin 359
Lubricating Systems
Operation and Adjustments
20M064 & 21M128
2 and 4 Quart Capacities for 32-200-300 Bearing Inch Applications
Operating Data & Operation of 30M384
3 Gallon Capacity for 32-200-300
Operating Data & Operation of 40M256
2 Gallon capacity for 300 and 1000 Bearing Inch Applications
Re-classifier Fittings and Selection with Tables
Application Engineering
Do's and Don'ts
Control
This Manual Has  48  Printed Pages.

Trane SCA 10MC01A and 4A, Climate Changer Heater. Install Maint Operations Manua

December 4, 2016, 8:20 am

≫ Next: Traub A15 A20 A25 A42 A60, Mill Spare Parts Manual 1964

≪ Previous: Trabon, Meter-Mist, Operating Data Engineering Lubrication System Manual

$

0

0

http://industrialmanuals.com/trane-10mc01a-climate-changer-heater-install-maint-operations-manua-p-5662.php

Trane Saca 10MC-1A and 4A, Climate Changers install Operations and Maintenance Manual Year (1978)

This Manual Covers Models:
Saca
10MC-1A
Saca INC 4A 
This Manual Includes:
General Information
Installation
Unit Location
Ground Level
Roof Top
Clearances and Dimensions
Drains
Vibration Isolation
Vertical Discharge Procedures
Control Settings
Operation Pressures
Startup
Winding thermostat
Reset Relay
Shutdown
Maintenance

Electric Heat Accessory, Use with Climate Changers
Installation and Wiring
Electrical Characteristics

This Manual Has 17 Printed Pages.
Year 1974 and January 1978

---

Traub A15 A20 A25 A42 A60, Mill Spare Parts Manual 1964

December 4, 2016, 8:22 am

≫ Next: Traub A15 A20 A25 A42 A60, Mill Spare Parts Manual 1966

≪ Previous: Trane SCA 10MC01A and 4A, Climate Changer Heater. Install Maint Operations Manua

$

0

0

http://industrialmanuals.com/traub-mill-spare-parts-manual-1964-p-4769.php

Traub A15 A20 A25 A42 A60, Mill Spare Parts List Manual (Part D, 1964)

This Manual Covers Models:
A15
A25
A20
A42
 
This Manual Includes:
Spare Parts Lists
Functionally Illustrated Drawings showing Component Identification

This Manual Has 84  Printed Pages.
Year 1964 Part D

Traub A15 A20 A25 A42 A60, Mill Spare Parts Manual 1966

December 4, 2016, 8:24 am

≫ Next: Traub A15 A20 A25 A42 A60, Part C Tools Cams Collets Manual 1964

≪ Previous: Traub A15 A20 A25 A42 A60, Mill Spare Parts Manual 1964

$

0

0

http://industrialmanuals.com/traub-mill-spare-parts-manual-1966-p-4770.php

Traub A15 A20 A25 A42 A60, Mill Spare Parts List Manual (Part D, 1966)

This Manual Covers Models:
A15
A25
A20
A42
A60
 
This Manual Includes:
Spare Parts Lists
Functionally Illustrated Drawings showing Component Identification

This Manual Has 84 Printed Pages.
Year 1966

Traub A15 A20 A25 A42 A60, Part C Tools Cams Collets Manual 1964

December 4, 2016, 8:26 am

≫ Next: Traub A15 A20 A25 A42, Spare Parts List Manual 1961

≪ Previous: Traub A15 A20 A25 A42 A60, Mill Spare Parts Manual 1966

$

0

0

Traub A15 A20 A25 A42 A60, Part C Tools Cams Collets Manual Year (1964)

This Manual Covers Models:
A15
A25
A20
A42
A60
 
This Manual Includes:
Please visit our Photo Gallery Above for Content

This Manual Has 47 Printed Pages.
Year Edition 1964
http://industrialmanuals.com/traub-part-tools-cams-collets-manual-1964-p-4766.php

Traub A15 A20 A25 A42, Spare Parts List Manual 1961

December 4, 2016, 8:28 am

≫ Next: Traub A15 A20 A25, Single Spindle Bar Automatic, Description Manual 1964

≪ Previous: Traub A15 A20 A25 A42 A60, Part C Tools Cams Collets Manual 1964

$

0

0

http://industrialmanuals.com/traub-spare-parts-list-manual-1961-p-4768.php

Traub A15 A20 A25 A42, Spare Parts Lists Manual Year (1961)

This Manual Covers Models:
A15
A25
A20
A42
 
This Manual Includes:
Spare Parts Lists
Functionally Illustrated Drawings showing Component Identification

This Manual Has 72 Printed Pages.
Year 1961

Traub A15 A20 A25, Single Spindle Bar Automatic, Description Manual 1964

December 8, 2016, 6:40 am

≫ Next: Traub AF 130, AM42 AM60, Six Position turret, Service and Parts Manual 1964

≪ Previous: Traub A15 A20 A25 A42, Spare Parts List Manual 1961

$

0

0

http://industrialmanuals.com/traub-single-spindle-automatic-description-manual-1964-p-4773.php

Traub A15 A20 A25, Single Spindle Bar Automatic Description Manual Year (1964 Part A)

This Manual Covers Models:
A15
A20
A25
Part A
 
This Manual Includes:
Electrical Wiring Diagrams
Electrical Parts Lists
English Version
Functionally Illustrated Drawings showing Component Identification

This Manual Has 54 Printed Pages.
Year Edition 1964