September 23, 2016, 10:28 am
↧
September 23, 2016, 10:30 am
http://industrialmanuals.com/sullair-open-24kt-rotary-screw-compressor-operation-manual-p-4489.phpSullair 10B Open 25, 30 40 HP Standard & 24 KT, Rotary Screw Air Compressor Operations and Parts Manual Year (1984)This Manual Covers Models: 10B
Open
25
30
40
HP
Standard
24 KT This Manual Includes:
Safety
Description
Specifications
Installation
Operations
Maintenance
Parts Lists
Functionally Illustrated Assembly Drawings showing Component Identification
This Manual Has 80 Printed Pages.
Year May 1984
↧
↧
September 23, 2016, 10:31 am
↧
September 23, 2016, 10:33 am
http://industrialmanuals.com/sullair-24kt-screw-compressor-operator-manual-p-2208.phpSullair Series 12 & 16, 40, 50, 60 and 75 HP Standard & 24 KT Industrial Rotary Screw Air Compressor Operators Manual Year (1984)
This Manual Covers Models:
12
16
40
50
60
75 HP
Standard
24KT
This Manual Includes:
Introduction
Description of Components
Sulliscrew Compressor unit Functional Description
Compressor Cooling and Lubrication System, Functional Description
1.6 Control System, Functional Description
1.7 Air Inlet System, Function Description
1.8 Instrument Panel Group, Functional Description
Table Of Specifications
Location of Compressor
Ventilation and Cooling
Service Air Piping
Coupling Alignment
fluid Level Check
Motor Rotation Direction Check
Electrical Preparation
General
Purpose of Controls
Initial Star Up Procedure
Subsequent Start up Procedure
Shutdown Procedure
This Manual Has 33 Printed Pages.
Year May 15, 1984
↧
September 26, 2016, 9:44 am
http://industrialmanuals.com/sullair-series-screw-compressor-operation-maintenance-parts-manual-p-2206.phpSullair Series 10 Motor Driven Screw Compressor, Operation – Maintenance & Parts List Manual
This Manual Covers Models:
Series 10
This Manual Includes:
Model #10-30L,
Model # 10-30H,
Model # 10-40L,
Model # 10-40H,
Specifications
Sketch of General Arrangement
Description of Components
Installation
Operations
Maintenance
Trouble shooting
Parts List
Drawings showing Component Identification
Wiring Diagram: 230-470-575 Volt
This Manual Has 31 Printed Pages.
↧
↧
September 26, 2016, 9:46 am
http://industrialmanuals.com/sullair-series-screw-compressor-parts-manual-p-2207.phpSullair Series 12 & 16, 40, 50, 60 and 75 HP Standard & 24 KT Industrial Rotary Screw Air Compressor Parts Manual Year (1984)
This Manual Covers Models:
12
16
40
50
60
75 HP
Standard
24KT
This Manual Includes:
Continuation of the Operators Manual P00396
Product Safety Policy
Illustrations and Parts Lists
Parts Ordering Procedure
12/16 Recommended Spare Pars List
Motor, Frame, Compressor & Parts (12 Series)
Compressor Cooling & Lubrication System (Air-cooled, 12 Series)
16 Series and Water-Cooled 16 Series
Compressor Discharge System (12 & 16 Series)
Air Cooled Cooling Assembly (12 & 16 Series
Capacity Control System (12 & 16 Series)
Instrument Panel & Parts (12 & !16 Series)
Electro-Pneumatic Control System (12 & 16 Series)
Electric Control Box Assembly (12 & 16 Series)
Canopy Enclosure & Parts (12 & 16 Series)
This Manual Has 51 Printed Pages.
Year May 15, 1984
↧
September 26, 2016, 9:48 am
http://industrialmanuals.com/sullair-series-compressor-operations-maintenance-parts-manual-p-4510.phpSullair Series 25, Air Compressor, Operations Maintenance and Parts Manual This Manual Covers Models: Series 25
150 HorsepowerThis Manual Includes:
Motor Driven
Specifications, Description of Components
Installation
Lube Oil Specifications
Operations
Maintenance
System Capacities
Replacement Elements, Recommended Spare Parts
Trouble shooting
Compressor Unit, Motor and Parts Illustration
Illustrations and Parts:
Air Inlet System
Compressor Oil Cooling System
Compressor Discharge System
Control
Instrument Panel & Parts
Control Panel Parts (no Illustration)
Frame Base and Parts
This copy is Intellectually Sound
This Manual Has 28 Printed Pages.
↧
September 26, 2016, 9:50 am
↧
September 26, 2016, 9:52 am
http://industrialmanuals.com/summit-lathe-instructions-parts-electrical-manual-p-4662.phpSummit 17”, Lathe Instruction and Parts Lists Manual Year (1974)This Manual Covers Models: 17” This Manual Includes:An Index is provided in our photo Gallery above.Swing over the bed is 19”
Main Spindle Bore 3
Tailstock Sleeve Diameter 3”
Assemblies and Control Diagram
Taper Turning Attachment Diagram
Electrical Wiring Diagram
This Manual Has 64 Printed Pages.
Year October 1974
↧
↧
September 26, 2016, 9:55 am
http://industrialmanuals.com/summit-lathe-instructions-parts-electrical-manual-p-4661.phpSummit 18”, Lathe Instructions Parts and Electrical ManualThis Manual Covers Models: 18” This Manual Includes:
Dimensions
Main Components
Main Components Drawing
Specifications
Hoisting Drawing and Transportation
Foundation and Drawing
Use of Mounting Pads
Pre-Operations Procedures
Lubrication and Diagram
Operation
Chart of Spindle Speeds
Speeds and Feeds
Chart of Torque
Thread Chart
Gear Pitch
Spindle Drawing
Lathe Adjustment
Clutch and Brake Drawing
Cross Slide Drawing
Lead Screw Assembly drawing
V Belt and Drawing
Coolant System
Electrical System
This copy is Intellectually Sound. 2 prints are a little light but I didn’t want to hold this information Hostage because of a couple pages being hard to read. I will price it accordingly.
This Manual Has 70 Printed Pages.
↧
September 28, 2016, 7:05 am
http://industrialmanuals.com/summit-lathe-page-operations-parts-manual-p-4663.phpSummit 19”, Lathe Operations and Parts ManualThis Manual Covers Models: 19” This Manual Includes:
Assemblies and Controls with Diagram
Transportation
Foundation
Installation
Preparation for Operations
Lubrication Chart
Operations
Threads
Feeds and speeds
19-4” Lathe Parts List
The drawings are split into 2 pages per Assembly
This copy is Intellectually Sound
This Manual Has 119 Printed Pages.
↧
September 28, 2016, 7:07 am
↧
September 28, 2016, 7:09 am
http://industrialmanuals.com/summit-lathe-service-maintenance-parts-manual-1974-p-4667.phpSummit 23-4”, 26 & 30 – 4”, Lathe Service Maintenance and Parts Manual Year (1974)This Manual Covers Models: 23-4”
26 4”
30 4” This Manual Includes:Engine Lathe
Please view our photo Gallery for more content:A Little Bit:
Installation
Lubrication
Electrical Connections
Adjustments on Mechanical Clutch, Headstock
Disengagement and Adjust of clutch in apron
Lifting Points
Controls
Longitudinal X Gear Box Diagrams/Drawings X
manifold Lube System
Taper Turning Attachment
Electrical Schematic
Instructions for Thread Chasing Dial Use
This Manual Has 28 Printed Pages.
Year 1974
↧
↧
September 30, 2016, 1:00 pm
http://industrialmanuals.com/summit-horizontal-mill-instructions-parts-manual-1975-p-4665.phpSummit 3 UH, Horizontal Mill, Instructions and Parts Manual Year (1975)This Manual Covers Models: 3 UH This Manual Includes:
Lifting Instructions
Foundation
Installation
electrical Hook up
electrical Equip Components List and Drawings
start up Instructions
Major Components Drawing and List
Lubrication Instructions and Diagrams
Adjusting the Main Shaft Axial Play
Adjusting the Table lead Screw Axial Play
Adjusting the Arbor Support Bearings
Adjusting the Knee Key for Verti Shifting
Adjusting the Play Between Nut and Table Lead Screw
Adjusting the Safety Clutch and the disk Clutch
Adjusting the Slide Keys for Cross
Automatic Table Cycles
Electrical Wiring Diagram
Listing of Symbols
Kinematic Diagram
Gearing Schematic
List of Bearings
Parts Drawings
This Manual Has 47 Printed Pages.
Year December 1975
↧
September 30, 2016, 1:02 pm
http://industrialmanuals.com/summit-radial-drill-maintenance-manual-p-4659.phpSummit 3’ x 8”, 4’ Radial Drill, Use and Maintenance ManualThis Manual Covers Models: Four Languages:
English
Indice
Sommaire
Inhaltsverzeichnis
3’ x 8”
4’ This Manual Includes:
Index
Preliminary Work
Technical Feataures
Lifting of the Mahcine
Foundation
Driving Units
Overall Dimensions
Machine Lubrication
Head Lubrication Scheme
Machine Dislocking
Raising and Lowering the Arm
Spindle Speed Gear
Slide Rule Reading
Head Sliding Adjustment
Safety Device Against the Failing of the Arm
Adjustment of the Counter Weight Spring of the Spindle
Spindle Adjustment
Arm Locking Adjustment
Column Locking Adjustment
Electrical Plant
This Manual Has 46 Printed Pages.
↧
September 30, 2016, 1:05 pm
↧
September 30, 2016, 1:10 pm
http://industrialmanuals.com/summit-milling-operations-parts-electrical-manual-1941-p-4666.phpSummit 4 1/8” HBM, Milling Machine, Operations Parts and Electrical ManualThis Manual Covers Models: 4 1/8” This Manual Includes:
Specifications
Foundation and Installation
Lifting and transporting
Cleaning the Machine
Telescopic Way Cover
Lubrication
Major Components
Control Panel Components
Operations Instructions
Measuring Devices
Maintenance
Maintenance Schedule Description
Tool Clamping in the Spindle
Facing Head
Auxiliary Bearing
angle Milling Head
Boring Spindle Tool Connecting Dimensions
Milling Spindle Connecting Dimensions
Major Electrical Components Front and Rear View
Major Electrical Components Parts Lists
Control panel Parts Lists
Electrical Schematics
Electrical Cabinet Layout
Electrical Parts List
This Manual Has 88 Printed Pages.
↧
↧
September 30, 2016, 1:31 pm
http://industrialmanuals.com/summit-radial-drill-maintenance-manu-p-4660.phpSummit 4’ x 12”, 5’ x 14.5” & 6’ x 14.5”, Radial Drill, Use and Maintenance ManualThis Manual Covers Models: Four Languages:
English
Indice
Sommaire
Inhaltsverzeichnis
4’ x 12”
5’ x 14 ½ “
6’ x 14 ½” This Manual Includes:Index
Preliminary Work
Technical Features
Lifting of the Machine
Foundation
Driving Units
Overall Dimensions
Machine Lubrication
Head Lubrication Scheme
Machine Dislocking
Rules for connecting the Main to the Drill
Spindle Speed Gear
Slide rule Reading
Removal of the Drill
Head Sliding Adjustment
Security Device Against the Falling of the Arm
Adjustment of the Counter Weight spring of The Spindle
Spindle Adjustment
Column Locking Adjustment
Locking Adjustment for Arm and Head
Adjustment of the End Stroke of the Clamping
Adjustment Clutch
Electrical PlantIndex of Spare Parts
This Manual Has 49 Printed Pages.
↧
September 30, 2016, 1:34 pm
http://industrialmanuals.com/summit-surface-grinder-opeartions-maintenance-parts-manual-1978-p-4668.phpSummit 6” x18”, Surface Grinder Operators Instructions Manual Year (1978)This Manual Covers Models: 6” x 18” This Manual Includes:
Installing and Relocating the Machine
Setup Adjustment sand Operating Controls
Typical Operations
Optional Mechanism and Additional Equipment
Grinding Wheels and How to Select them
Maintenance
Parts Lists
Functionally Illustrated Drawings showing Component Identification
This Manual Has 31 Printed Pages.
Year July 1978
↧
September 30, 2016, 1:38 pm
http://industrialmanuals.com/summit-level-bandit-programming-manual-year-1979-p-4658.phpSummit Level II Bandit, Program Manual Year (1979)This Manual Covers Models: Level II
Bandit This Manual Includes:
Firmware Features for Mill Systems
External Input/Output
Pop Board Dip Switch Settings
Error Codes
G Codes
G2, G3 Arcs & Circles Routine
G26, G27 Auto Routines
G59 Absolute Distance, Compare & Skip
G60 Mirror Image
G68 Zero Program Memory
G69 Zero Tool Offset Memory
G70/71 inch/ Metric Test
Bandit Autocycles – G29 & G78 through 89
Absolute/Incremental Programming
Specification for G Preparatory Codes
G2/G3
G26/27
G29
G59
G60
G68/G69
G70/71
G78 through 89
G90/91/92/98
Branches & Subroutines – N & /N
This Manual Has 92 Printed Pages.
Year August 1979
↧
